Specifications
The Q-Control module is available in different versions:
Compliance: CE
Power Supply: 100-240 Vac, 0.8 A, 47-63 Hz, IEC connector
For price and availability information contact our distribution partners:
Atomic Force F&E GmbH (Europe)
Nanoscience Instruments, Inc. (North and South America)
TOMOE Engineering Co., Ltd. (Japan)
| Frequency Range | Typical Application | Q-Control II | Q-Control III |
| 100 kHz - 500 kHz |
Tapping Mode in air |
 |
|
| 20 kHz - 100 kHz | Magnetic/Electrostatic Force Microscopy | |
|
| 5 kHz - 20 kHz | Tapping Mode in liquid |
|
Both versions are available with general purpose BNC-type connectors or
with special connectors compatible with SPMs either from Digital
Instruments / Veeco (type NanoScope) or from Shimadzu:
| Version | Connection | Connector Type |
| General Purpose | Detector (in), Drive (in), Drive (out), Trigger (in) | BNC |
| DI / Veeco |
NanoScope Extender / Quadrex, Microscope | 37-way D Sub |
| Shimadzu |
SPM Controller, SPM Stage |
37-way D Sub |
Please note: for operation with NanoScope scanning probe microscopes
from Digital Instruments / Veeco these have to be equipped with an
external NanoScope Extender or Quadrex module.
Compliance: CE
Power Supply: 100-240 Vac, 0.8 A, 47-63 Hz, IEC connector
For price and availability information contact our distribution partners:
Atomic Force F&E GmbH (Europe)
Nanoscience Instruments, Inc. (North and South America)
TOMOE Engineering Co., Ltd. (Japan)
Specifications are subject to change without notice or obligation.